The easiest reflective HTV you’ve ever used!

EasyReflective is Siser’s only reflective HTV with a pressure sensitive (sticky) carrier just like EasyWeed®! This highly reflective heat transfer vinyl is truly an exceptional polyurethane product due to its glass bead construction that illuminates the darkest of conditions. The pressure sensitive carrier allows you to re-stick lifting material or replace a piece that’s accidentally weeded away. With a low application temperature and simple warm peel, EasyReflective can be applied to all kinds of garments and accessories that need to stand out in low lighting. Heat apply EasyReflective with a heat press or home iron for increased visibility on sports garments, pet clothes, construction crew uniforms, and more!

EasyReflective is 140 Microns / 5.5 Mils and is a PU composition.

https://www.youtube.com/watch?time_continue=51&v=_SJPnLDc4yQ&feature=emb_logo

Cutting Settings:

Cricut: Blade: Standard Setting: Iron-on

Silhouette Cameo: Blade: Standard, 3 Material: Heat Transfer, Smooth Speed: 8 Force: 6

Brother ScanNCut: Blade: Standard, 2 Cut Speed: 1 Cut Pressure: 1

Application Settings:

Application instructions (home iron)

• Set iron dial between Cotton and Linen
• Cover design with Multipurpose Paper or Heat Transfer Cover Sheet
• Place on flat, hard surface (ironing board not recommended)
• Press iron with medium/firm pressure (do not slide iron)
• Press each section of design for 10-15 seconds
• If areas of design lift after application, replace cover sheet
and re-press for 10 seconds
• Peel carrier warm

Application Instructions (heat press)

• Cover design with Multipurpose Paper or Heat Transfer Cover Sheet
• Preheat garment for 2-3 seconds
• Apply design at 305°F/150°C
• Use medium pressure for 15 seconds
• Peel carrier warm (at least 15 seconds off press)